 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier August 2006 - Rev 02-Aug-06 CMM2030-BD Features Small Size High Gain: 12 dB Typical P1dB = +18 dBm, Typical 30 kHz to 30 GHz Bandwidth Low Gain Ripple: 1.0 dB pp Typical Sub 0.25 Micron PHEMT Low DC Power Consumption Applications Input Stage Driver for LiNb03 Modulator Driver Amplifier @ OC-192 Medium Power Linear Gain Block for Broadband Systems Receive Amplifier for OC-192 Chip Diagram Units in Microns Description The CMM2030-BD is a precision GaAs MMIC, medium power amplifier and is part of Celeritek's family of WideFiberTM products for optical communications applications. The CMM2030-BD optical driver amplifier gives fiber optic system designers a unique combination of wideband frequency coverage, along with a flat response and very low internal jitter. It is a precision PHEMT GaAs MMIC medium power amplifier with +18 dBm @ P1dB. It operates from 30 kHz to 32 GHz with 12 dB linear gain. Low internal jitter makes it especially well suited for high speed digital data applications. It is an excellent choice as an input stage amplifier for Lithium Niobate (Mach-Zehnder) external modulator driver amplifiers for OC-192/STM64 metropolitan and long-haul dense wave-division multiplexed optical networking applications and other high speed applications. When used as an amplifier to drive Celeritek's CMM3030-BD as much as 7.5 V peak-to-peak can be achieved. CMM2030-BD amplifiers are shipped in Gel Pack from Celeritek's foundry. Specifications (TA = 25C, VDD = 5V) (On-Wafer Probe) Parameters Units Min Typ Max Frequency Range Small Signal Gain Gain Flatness Input VSWR Output VSWR Power Output (@1 dB Gain Compression) @ 9 GHz Current -- dB dB -- -- dBm mA 30 kHz 10.0 30.0 GHz 12.0 0.6 1.8:1 1.7:1 +18.0 100 150 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 1 of 4 Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier August 2006 - Rev 02-Aug-06 CMM2030-BD Absolute Maximum Ratings Parameter Rating Die Attach and Bonding Procedures 12 V -5 V 375 mA 3.0 W +175C -65C to +175C +320C +23 dBm Die Attach: Eutectic die attach is recommended. For eutectic die attach: Preform: AuSn (80% Au, 20% Sn); Stage Temperature: 290C, 5C; Handling Tool: Tweezers; Time: 1 min or less. Wire Bonding: Wire Size: 0.7 to 1.0 mil in diameter (prestressed); Thermocompression bonding is preferred over thermosonic bonding. For thermocompression bonding: Stage Temperature: 250C; Bond Tip Temperature: 150C; Bonding Tip Pressure: 18 to 40 gms depending on size of wire. Drain Voltage Gate Voltage Drain Current Continuous Power Dissipation Channel Temperature Storage Temperature Mounting Temperature Input Power Typical Performance P1dB vs Frequency Performance Optimization Using the Gain-Ctl facility of the CMM2030-BD, output power may be increased by application of 1.2 to 1.8 Volts to the Bias Control pad. If the Gain-Ctl facility is not used, a fixed voltage at the Bias Control pad can be implemented by connecting a off-chip parallel resistor to the pad which will lower the output voltage accordingly. If Bias Control voltage is decreased further than those lowest values given in the tables, both gain and output power will start to drop. Page 2 of 4 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier August 2006 - Rev 02-Aug-06 CMM2030-BD Typical Performance S11 vs Frequency S21 vs Frequency S22 vs Frequency S12 vs Frequency Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 4 Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier August 2006 - Rev 02-Aug-06 CMM2030-BD Typical Performance S22 & S11 vs Frequency Gain Delay vs Frequency Schematic Diagram Ordering Information Part Number for Ordering CMM2030-BD Description Optical Modulator Driver Amplifier Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 4 Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. |
Price & Availability of CMM2030-BD
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |